Cisco SPA 504G Owner's Guide

Change the Number of Rings Before Voicemail Picks Up
Your Voicemail box is programmed to take messages when you can’t
answer your phone. If you want the phone to ring more or less times,
you may change this setting:
1. Press the
2. Select or Press # 6 Call Forward
3. Select or Press # 4 CFWD No Ans Delay
4. Change the number of seconds you would like the phone to Ring
5. Press the ok soft key
6. Press the save soft key
7. Press the to get back to the Home screen
33

Cisco SPA 504G Specifications

General

Lines	4
Protocols	SIP, SPCP
Speakerphone	Yes
Ethernet Ports	2 (10/100 Mbps)
Power over Ethernet (PoE)	Yes
Voice Codecs	G.711, G.726, G.729
Headset Port	Yes (2.5mm)
Display	Monochrome LCD