Cisco SPA 504G Owner's Guide

This diagram depicts your setup options. By purchasing the optional
Wireless Transmitter and Wireless Adapters you may also connect Desk
Phones wirelessly.
The following setup options ARE NOT supported:
1. Connecting one phone to another
2. Connecting a phone to the base unit then connecting a PC
3. Connecting a phone to the base unit wirelessly and then connecting
a PC
4. Connecting a PC to the base unit
5. Connecting a phone to a router that is connected to another router
43

Cisco SPA 504G Specifications

General

Lines	4
Protocols	SIP, SPCP
Speakerphone	Yes
Ethernet Ports	2 (10/100 Mbps)
Power over Ethernet (PoE)	Yes
Voice Codecs	G.711, G.726, G.729
Headset Port	Yes (2.5mm)
Display	Monochrome LCD