Cisco SPA 525G2

Cisco SPA IP Phone Field Reference
Info Tab
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide 204
B
NTP Enable (Cisco SPA
525G/525G2 only)
Shows if Network Time Protocol is enabled.
Primary NTP Server (Cisco
SPA 525G/525G2 only)
IP Address of the primary NTP server.
Secondary NTP Server
(Cisco SPA 525G/525G2
only)
IP Address of the secondary NTP server.
TFTP Server (Cisco SPA
525G/525G2 only)
Address of the TFTP server for provisioning.
Bluetooth Enabled (Cisco SPA
525G/525G2 only)
Shows if Bluetooth is enabled.
Bluetooth Firmware Version
(Cisco SPA 525G/525G2
only)
Displays the Bluetooth firmware version.
Bluetooth Connected (Cisco
SPA 525G/525G2 only)
Shows if a Bluetooth device is connected to the phone.
Bluetooth MAC (Cisco SPA
525G/525G2 only)
Shows the hardware address of the Bluetooth device.
Connected Device ID (Cisco
SPA 525G/525G2 only)
Shows the name of the connected Bluetooth device.
Wireless Enabled (Cisco SPA
525G/525G2 only)
Shows if Wireless-G is enabled on the phone.
Wireless Connected (Cisco
SPA 525G/525G2 only)
Shows if the phone is connected to the wireless
network.
Wireless MAC (Cisco SPA
525G/525G2 only)
Shows the hardware address of the Wireless-G
controller.
SSID (Cisco SPA 525G/
525G2 only)
Shows the SSID, or name of the wireless router to
which the phone is connected.
Standard Channel (Cisco SPA
525G/525G2 only)
Shows the wireless channel being used in the wireless
connection.
Security Mode (Cisco SPA
525G/525G2 only)
Shows if wireless security is configured on the phone
(yes or no).
Parameter Description