Cisco SPA 525G2

Cisco SPA IP Phone Field Reference
Regional Tab
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide 233
B
Regional Tab
This section describes the fields for the following headings on the Regional tab:
• Call Progress Tones, page 233
• Distinctive Ring Patterns, page 236
• Control Timer Values (sec), page 237
• Vertical Service Activation Codes, page 238
• Vertical Service Announcement Codes, page 243
• Outbound Call Codec Selection Codes, page 243
• Time (Cisco SPA 525G/525G2 Only), page 246
• Language (Cisco SPA 525G/525G2 only), page 246
• Miscellaneous, page 246
Call Progress Tones
Parameter Description
Dial Tone Prompts the user to enter a phone number.
Defaults to 350@-19,440@-19;10(*/0/1+2).
Bluetooth Dial Tone (Cisco
SPA 525G/525G2 only)
Tone that indicates a bluetooth headset is on and the
user can make a call.
Defaults to 350@-19,440@-19;1(0/*/0);10(*/0/1+2).
Outside Dial Tone Alternative to the Dial Tone. It prompts the user to enter
an external phone number, as opposed to an internal
extension. It is triggered by a, (comma) character
encountered in the dial plan.
Defaults to 420@-16;10(*/0/1).
Prompt Tone Prompts the user to enter a call forwarding phone
number.
Defaults to 520@-19,620@-19;10(*/0/1+2).