Cisco SPA 525G2

Cisco SPA IP Phone Field Reference
System Tab
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide 212
B
System Tab
This section describes the fields for the following headings on the System tab:
• System Configuration, page 212
• Internet Connection Type and Static IP Settings, page 213
• PPPoE Settings (Cisco SPA 525G/525G2 Only), page 214
• Optional Network Configuration, page 215
• VLAN Settings, page 216
• Wi-Fi Settings (Cisco SPA 525G/525G2 only), page 217
• Bluetooth Settings (Cisco SPA 525G/525G2 only), page 217
• VPN Settings (Cisco SPA 525G/525G2 only), page 217
System Configuration
Parameter Description
Restricted Access Domains
(SIP)
This feature is used when implementing software
customization.
Enable Web Server Enable/disable web server of the IP phone.
Defaults to yes.
Web Server Port Port number of the configuration utility.
Defaults to 80.
SPA525-http-write (Cisco
SPA 525G/525G2 SPCP only)
Allow Cisco Configuration Assistant (CCA) or other
application to write XML file parameters directly to the
phone using HTTP.
Choose yes to allow this feature, or no to disable this
feature.
Enable Web Admin Access Lets you enable or disable local access to the
configuration utility. Select yes or no from the drop-
down menu.
Defaults to yes.