Cisco SPA IP Phone Field Reference
Ext Tab
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide 280
B
Mailbox ID Identifies the voice mailbox number/ID for the phone.
Defaults to blank.
Voice Mail Server Identifies the SpecVM server for the phone, generally
the IP address and port number of the VM server.
Voice Mail Subscribe Interval The expiration time, in seconds, of a subscription to a
voice mail server.
State Agent Reserved feature.
CFWD Notify Serv Specifies whether to enable a SIP-B feature regarding
the sending of a Notify to the phone when a call is
forwarded elsewhere.
Defaults to No.
CFWD Notifier Typically, this field is configured with the SIP proxy
information.
User ID with Domain (Cisco
SPA 300 Series)
When this field is set to yes, the IP phone will
show the Caller ID followed by domain name, and
the domain name is also shown in the received
calls list. This parameter is used when calls are
made between different branches of the same
phone system. For example, if user
John@domain1.com receives a call from
Mary@domain2.com, by default the phone will
only show the call as being from "Mary", so John is
not able to pick up or call back Mary from the
received call list. With this parameter set to yes,
the phone logs the call as being from
Mary@domain2.com, and John can dial Mary from
the received call list.
Parameter Description
To Next Page
Loading...
