Cisco SPA509G How To Configure

3 of 4
4. Open the Ext 1 tab.
SIP Port: Set this value to 7000. The Cloud servers only operate through this port.
Message Waiting: Set to yes.
Proxy: Enter the value for your Zang Office Realm (e.g. company.office.zang.io:7000).
User ID: Enter the Zang Office SIP Username.
Password: Enter the Zang Office SIP Password.
5. Open the Phone tab. Set the Voice Mail Number to *98.
Optionally, you can enter a name in the Station Display Name field. This will appear in the top
right-hand corner of the telephone display. It can be helpful to include your extension number in
this field.
6. Click Submit All Changes. The telephone will reboot and load the updated values.
If prompted to enter a Mailbox ID, enter *98.

Cisco SPA509G Specifications

General

Brand	Cisco
Model	SPA509G
Category	Telephone
Language	English