D14850.02 MX Series Administrator Guide (TC5.0) | 2011 NOVEMBER | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com
55
Cisco TelePresence MX Series
ADMINISTRATOR GUIDE
Enter a System Name to define a name of the system unit. If the H.323 Alias ID is configured
on the system then this ID will be used instead of the system name. The system name will be
displayed:
1) When the codec is acting as an SNMP Agent.
2) Towards a DHCP server.
ADMIN
<S: 0, 50>
Format: String with a maximum of 50 characters.
SystemUnit Name: "Meeting Room"
Select the language to be used in the menus on screen.
USER
<English/ChineseSimplified/Finnish/French/German/Japanese/
Russian/Swedish>
SystemUnit MenuLanguage: English
Not applicable in this version.
Select whether the video system is for personal use or to be used in a multiuser environment. It
is highly recommended not to use the default setting.
ADMIN
<Personal/Shared>
Personal: Set to Personal when the system is for personal use.
Shared: Set to Shared when the system is used in a multiuser environment.
SystemUnit Type: Personal
Set the call logging mode for calls that are received or placed by the system. The call logs may
then be viewed via the web interface or using the xHistory command.
ADMIN
<On/Off>
On: Enable logging.
Off: Disable logging.
SystemUnit CallLogging Mode: On
Not applicable in this version.
To Next Page
Loading...
Need help?
General
