Cisco TelePresence MX300 User Manual

D14850.02 MX Series Administrator Guide (TC5.0) | 2011 NOVEMBER | © 2011 Cisco Systems, Inc. All rights reserved. www.cisco.com
63
Cisco TelePresence MX Series
ADMINISTRATOR GUIDE

NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Will use the a RateAdaption algorithm adapted to the PacketLossResilience mechanism. Default
value is On.
 ADMIN
 <On/Off>
On: RateAdaption will be used as part of the PacketLossResilience mechanism.
Off: RateAdaption will NOT be used as part of the PacketLossResilience mechanism.
 Experimental Conference 1 PacketLossResilience RateAdaption: On

NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
 ADMIN
 <On/Off>
 Experimental Conference 1 ReceiverBasedDownspeeding: Off

NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
 ADMIN
 <On/Off>
 Experimental NetworkServices UPnP Mode: Off

NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
 ADMIN
 <0..3600>
 Experimental NetworkServices UPnP Timeout: 0

NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
This configuration tells whether CTMS (Cisco TelePresence Multipoint Switch) is supported or
not.
 ADMIN
 <Off/On>
Off: CTMS is not supported.
On: CTMS is supported.
 Experimental CTMSSupport Mode: On

NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
 ADMIN
 <Off/CallRate2256/CallRate768/ReduceTo576p/ReduceTo360p/
Unencrypted/Disconnect>
 Experimental PacketOverloadHandling WhenDetected: Off

NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
 ADMIN
 <Indicators/Full>
 Experimental SystemUnit MenuType: Full

NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
 ADMIN
 <On/Off>
 Experimental SystemUnit SoftwareUpgrade RequireAuthentication:
Off

Cisco TelePresence MX300 Specifications

General

Camera Resolution	1080p
Connectivity	Ethernet, HDMI, USB
Product Type	Video conferencing system
Resolution	1920 x 1080
Protocols	SIP, H.323
Microphones	Integrated microphone array
Network	10/100/1000 Ethernet
Video Standards	H.264
Camera	12x zoom
Codec	H.264
Room Size	Medium to large rooms