Cisco TelePresence SX20 - Intelligent Proximity

D14908.10 SX20 Administrator Guide TC7.3, JULY 2015. www.cisco.com — Copyright © 2012-2015 Cisco Systems, Inc. All rights reserved.
32
Cisco TelePresence SX20 Quick Set Administrator Guide
User administration
Creating a new user account
Follow these steps in order to create a new user account:
1. Click Add new user....
2. Fill in the Username, Password and PIN code
*
, and check
the appropriate user roles check boxes.
As a default the user has to change the password and
PIN code when signing in for the first time.
Do not fill in the Client Certificate DN (Distinguished
Name) field unless you want to use certificate login on
HTTPS.
3. Set the Status to Active to activate the user.
4. Click Create User to save the changes.
Use the Back button to leave without making any
changes.
Navigate to: Configuration > User Administration
*
The password is used with the web interface and command line
interface; the PIN code is used with the TRC5 remote control and
on-screen menu when the Video OSD LoginRequired setting is
switched On.
(page 2 of 4)
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
Web interface