Cisco TelePresence SX20 - User Administration

D14908.10 SX20 Administrator Guide TC7.3, JULY 2015. www.cisco.com — Copyright © 2012-2015 Cisco Systems, Inc. All rights reserved.
33
Cisco TelePresence SX20 Quick Set Administrator Guide
User administration
Changing user privileges
Follow these steps in order to change the user privileges:
1. Click the name of an existing user to open the Editing
user window.
2. Check the appropriate user roles check boxes, decide if
the user has to change the password and PIN code on
the next sign in, and fill in the Client Certificate DN field if
using certificate login on HTTPS.
3. Click Update User to save the changes.
Use the Back button to leave without making any
changes.
Changing the password or PIN code
Follow these steps in order to change the password or PIN
code
*
:
1. Click the name of an existing user to open the Editing
user window.
2. Enter the new password or PIN code in the appropriate
input fields.
3. Click Change Password or Change PIN to save the
change.
Use the Back button to leave without making any
changes.
Navigate to: Configuration > User Administration
*
The password is used with the web interface and command
line interface; the PIN code is used with the remote control and
on-screen menu when the Video OSD LoginRequired setting is
switched On.
(page 3 of 4)
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
Web interface