Cisco TrustSec - Page 122

7-36
Cisco TrustSec Configuration Guide
OL-22192-01
Chapter 7 Cisco TrustSec Command Summary
cts server
Command Modes Global configuration (config)
Supported User Roles Administrator
Command History
Usage Guidelines Use the key-wrap keyword when operating the switch in FIPS mode.
Information on RADIUS server load balancing is available at the following URL:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sbrdldbl.html
Examples The following example shows how to configure server settings and how to display the Cisco TrustSec
server list:
Router# configure terminal
Router(config)# cts server load-balance method least-outstanding batch-size 50
ignore-preferred-server
Router(config)# cts server test all deadtime 20
Router(config)# cts server test all enable
Router(config)# cts server test 10.15.20.102 idle-time 120
Router(config)# exit
Router# show cts server-list
CTS Server Radius Load Balance = ENABLED
Method = least-outstanding
Batch size = 50
Ignore preferred server
Server Group Deadtime = 20 secs (default)
Global Server Liveness Automated Test Deadtime = 20 secs
Global Server Liveness Automated Test Idle Time = 60 mins
Global Server Liveness Automated Test = ENABLED (default)
Preferred list, 1 server(s):
*Server: 10.15.20.102, port 1812, A-ID 87B3503255C4384485BB808DC24C6F55
Status = ALIVE
auto-test = TRUE, idle-time = 120 mins, deadtime = 20 secs
Installed list: SL1-1E6E6AE57D4E2A9B320D1844C68BA291, 3 server(s):
*Server: 10.15.20.102, port 1812, A-ID 87B3503255C4384485BB808DC24C6F55
Status = ALIVE
auto-test = TRUE, idle-time = 60 mins, deadtime = 20 secs
*Server: 10.15.20.101, port 1812, A-ID 255C438487B3503485BBC6F55808DC24
Status = ALIVE
auto-test = TRUE, idle-time = 60 mins, deadtime = 20 secs
Installed list: SL2-1E6E6AE57D4E2A9B320D1844C68BA293, 3 server(s):
*Server: 10.0.0.1, port 1812, A-ID 04758B1F05D8C1439F27F9509E07CFB6.
Status = ALIVE
auto-test = TRUE, idle-time = 60 mins, deadtime = 20 secs
*Server: 10.0.0.2, port 1812, A-ID 04758B1F05D8C1439F27F9509E07CFB6.
Status = DEAD
auto-test = TRUE, idle-time = 60 mins, deadtime = 20 secs
Release Modification
12.2(33) SXI This command was introduced on the Catalyst 6500 series switches.
12.2(50) SY The key-wrap keyword was added on the Catalyst 6500 series switches.