C-1
Cisco TrustSec Configuration Guide
OL-22192-01
APPENDIX
C
Notes for Catalyst 6500 Series Switches
Revised: April 26, 2013, OL-22192-01
TrustSec Supported Hardware
TrustSec-capable supervisors and Line Cards are listed in tables 3 and 4 of “Cisco Catalyst 6500 Series
with Supervisor Engine 2T: Enabling Cisco TrustSec with Investment Protection,” at the following URL:
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/white_paper_c11-658388.html
The Catalyst 6500 Series switches that are not TrustSec hardware-capable implement TrustSec Network
Device Admission Control (NDAC) without SAP or 802.1AE link encryption.
For a complete table of features, platforms, and IOS images supported, see the latest Product Bulletins
at the following URL:
http://www.cisco.com/en/US/netsol/ns1051/index.html
See also, the Matrix of Cisco TrustSec-Enabled Infrastructure at the following URL:
http://www.cisco.com/en/US/solutions/ns170/ns896/ns1051/trustsec_matrix.html
Flexible NetFlow Support
Release Feature History
15.1(1)SY1 The following Flexible NetFlow flow exporter configuration
subcommand was introduced on the Catalyst 6500 series switches:
• option cts-sgt-table
This option allows Flexible NetFlow to export TrustSec environmental
data tables that map Security Group Tags (SGTs) to Security Group
Names (SGNs).
12.2(50) SY
IP Base LAN Image
The following Flexible NetFlow commands and flow objects were
introduced on the Catalyst 6500 series switches:
• cts role-based {ip | ipv6} flow monitor monitor_name dropped
• cts source group-tag
• cts destination group-tag
To Next Page
Loading...
Need help?
General