Cisco TrustSec

5-7
Cisco TrustSec Switch Configuration Guide
OL-22192-02
Chapter 5 Configuring SGACL Policies
Refreshing the Downloaded SGACL Policies
Refreshing the Downloaded SGACL Policies
Detailed Steps for Catalyst 6500, Catalyst 3850, Catalyst 3650
Command Purpose
Step 1
cts refresh policy {peer [peer-id]
| sgt [sgt_number|
default|unknown]}
Switch3850# cts refresh policy
peer my_cisco_ise
Performs an immediate refresh of the SGACL policies from
the authentication server.
• If a peer-id is specified, only the policies related to the
specified peer connection are refreshed. To refresh all
peer policies, press Enter without specifying an ID.
• If an SGT number is specified, only the policies related
to that SGT are refreshed. To refresh all security group
tag policies, press Enter without specifying an SGT
number. Select default to refresh the default policy.
Select unknown to refresh unknown policy.