Cisco TrustSec - Page 129

7-43
Cisco TrustSec Configuration Guide
OL-22192-01
Chapter 7 Cisco TrustSec Command Summary
clear cts cache
clear cts cache
To clear TrustSec authorization and use the clear cts counter Privileged EXEC command.
clear cts cache authorization-policies [peer | sgt]
clear cts cache environment-data
clear cts cache filename file
clear cts cache interface-controller [type slot/port]
Syntax Description
Defaults None
Command Modes Privileged EXEC (#)
Supported User Roles Administrator
Command History
Examples The following example deletes environment data from cache:
Router# clear cts cache environment-data
Router#
Note Clearing peer authorization and SGT policies are relevant only to TrustSec devices capable of
enforcing SGACLs.
Related Commands
authorization-policies [ peer | sgt] Clears all cached SGT and peer authorization policies.
environment-data Clears environment data cache file.
filename file Specifies filename of cache file to clear.
interface-controller type slot/port Specifies which interface controller cache to clear.
Release Modification
12.2(33) SXI This command was introduced on the Catalyst 6500 series switches.
12.2(50) SY The interface-controller keyword was introduced on the Catalyst 6500
series switches.
Command Description
cts cache Enables caching of TrustSec authorization and environment data information
to DRAM and NVRAM