7-46
Cisco TrustSec Configuration Guide
OL-22192-01
Chapter 7 Cisco TrustSec Command Summary
clear cts credentials
clear cts credentials
To delete the Trustsec device ID and password, use the clear cts credentials command in
privileged EXEC mode.
clear cts credentials
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Privileged EXEC (#)
Supported User Roles Administrator
Command History
Examples
Router# clear cts credentials
Router# clear cts environment-data
Router# show cts environment-data
CTS Environment Data
====================
Current state = START
Last status = Cleared
Environment data is empty
State Machine is running
Retry_timer (60 secs) is running
Related Commands
Release Modification
12.2(33) SXI This command was introduced on the Catalyst 6500 series switches.
Command Description
cts credentials Specifies the TrustSec ID and password.
To Next Page
Loading...
