7-53
Cisco TrustSec Configuration Guide
OL-22192-01
Chapter 7 Cisco TrustSec Command Summary
clear cts role-based counters
Specify the source SGT with the from keyword and the destination SGT with the to keyword. The
counters for the entire permission matrix are cleared when both the from and clauses to keywords are
omitted.
The default keyword clears the statistics of the default unicast policy.
When neither ipv4 nor ipv6 are specified the command clears only IPv4 counters.
Examples The following example clears all role-based counters compiling statics for SGACL enforcements on
IPv4 traffic:
router# clear cts role-based counters ipv4
Related Commands
To Next Page
Loading...
