7-82
Cisco TrustSec Configuration Guide
OL-22192-01
Chapter 7 Cisco TrustSec Command Summary
show cts interface
show cts interface
To display TrustSec configuration statistics, use the show cts interface command in EXEC or privileged
EXEC mode.
show cts interface [type slot/port] | [brief] | [summary]
Syntax Description
Defaults None
Command Modes EXEC (>); Privileged EXEC (#)
Supported User Roles Administrator
Command History
Usage Guidelines Use the show cts interface command without keywords to display verbose status for all CTS interfaces.
Examples The following example displays output without using a keyword (verbose status for all CTS interfaces):
Router# show cts interface
Global Dot1x feature is Enabled
Interface GigabitEthernet4/1:
CTS is enabled, mode: DOT1X
IFC state: OPEN
Authentication Status: SUCCEEDED
Peer identity: "r1"
Peer is: CTS capable
802.1X role: Authenticator
Reauth period configured: 0 (locally not configured)
Reauth period per policy: 3000 (server configured)
Reauth period applied to link: 3000 (server configured)
Authorization Status: SUCCEEDED
Peer SGT: 0
Peer SGT assignment: Untrusted
SAP Status: NOT APPLICABLE
Configured pairwise ciphers:
gcm-encrypt
null
type slot/port (Optional) Specifies an interface type and slot and port number. A
verbose status output for this interface is returned.
brief (Optional) Displays abbreviated status for all CTS interfaces.
summary (Optional) Displays a tabular summary of all CTS interfaces with 4 or
5 key status fields for each interface.
Release Modification
12.2(33) SXI This command was introduced on the Catalyst 6500 series switches.
To Next Page
Loading...
