Cisco TrustSec - Page 170

7-84
Cisco TrustSec Configuration Guide
OL-22192-01
Chapter 7 Cisco TrustSec Command Summary
show cts interface
The following example displays output using the brief keyword:
Router# show cts interface brief
Global Dot1x feature is Enabled
Interface GigabitEthernet4/1:
CTS is enabled, mode: DOT1X
IFC state: OPEN
Authentication Status: SUCCEEDED
Peer identity: "r1"
Peer is: CTS capable
802.1X role: Authenticator
Reauth period configured: 0 (locally not configured)
Reauth period per policy: 3000 (server configured)
Reauth period applied to link: 3000 (server configured)
Authorization Status: SUCCEEDED
Peer SGT: 0
Peer SGT assignment: Untrusted
SAP Status: NOT APPLICABLE
Dot1x Info for GigabitEthernet4/1
-----------------------------------
PAE = AUTHENTICATOR
PortControl = AUTO
ControlDirection = Both
HostMode = MULTI_HOST
ReAuthentication = Enabled
QuietPeriod = 60
ServerTimeout = 30
SuppTimeout = 30
ReAuthPeriod = 3000 (Locally configured)
ReAuthMax = 2
MaxReq = 2
TxPeriod = 30
The following example displays output using the summary keyword:
Router# show cts interface summary
Interface Mode IFC-state dot1x-role peer-id IFC-cache Dot1x
----------------------------------------------------------------------
Gi4/1 DOT1X OPEN Authent r1 invalid enabled
Related Commands Command Description
cts sxp Configures SXP on a network device.