7-100
Cisco TrustSec Configuration Guide
OL-22192-01
Chapter 7 Cisco TrustSec Command Summary
show cts keystore
show cts keystore
To display the contents of the software or hardware encryption keystore, use the show cts keystore
command in EXEC or privileged EXEC mode.
show cts keystore
Syntax Description This command has no commands or keywords.
Defaults None
Command Modes EXEC (>); Privileged EXEC (#)
Supported User Roles Administrator
Command History
Usage Guidelines This command shows all the records stored in the keystore. The stored secrets are not revealed.
Examples The following example displays the contents of a Catalyst 6500 software emulated keystore:
Router# show cts keystore
No hardware keystore present, using software emulation.
Keystore contains the following records (S=Simple Secret, P=PAC, R=RSA):
Index Type Name
----- ---- ----
0 P 05181D8147015544BC20F0119BE8717E
1 S CTS-password
The following example displays the contents of a Catalyst 6500 hardware keystore:
Router# show cts keystore
CTS keystore firmware version 2.0.
Keystore contains the following records (S=Simple Secret, P=PAC, R=RSA):
Index Type Name
----- ---- ----
0 S CTS-passwordFOX094901KW
1 P 74656D706F72617279
Hardware Keystore error counters:
FW Panics = 0
FW Resets = 0
Release Modification
12.2(33) SXI This command was introduced on the Catalyst 6500 series switches as
show cts keystore.
To Next Page
Loading...
Need help?
General