LAB5: Verifying VoiceViewExpress & IMAP
Cisco Unified Communications Technical Training
Page 49 of 171
Phone features – Label for buttons
CCA release 1.9 allows you to configure labels for each button. The labels default to the phone number
associated with the button. The Label cannot be changed for Intercom or monitored lines. Changing the
label on a shared line will change the label for all phones sharing the line.
1. Launch the “Voice” configuration page on CCA and go to the “Users” tab
2. Select the more option for cip. On button 4, select the type as Normal and specify the extension as
261. On button 5, select the type as Normal and specify the extension as 262
3. Configure the following labels:
Button 3: Shared_ext_275
Button 4: 261_SecondLine
Button 5: 262_ThirdLine
4. Click on ok for the “more” page and then click on Apply at the bottom of the Voice config page.
5. Verify the functionality – check the IP Communicator for the appropriate display of labels.
To Next Page
Loading...
General