LAB5: Verifying VoiceViewExpress & IMAP
Cisco Unified Communications Technical Training
Page 50 of 171
Phone features – Speed dials
CCA 1.9 supports global speed dial configuration. Users can configure personal speed dial by going to
the CME user web GUI (also, starting with CME 7.0 users can also use My Phone Apps on the phone
itself). Launch a web-browser and go to http://192.168.10.1/ccme.html. Use the credentials configured
in the “Users” tab. For example, for phone 201, use username/password as aip/cisco. Click on
“Configure > Phone” and then scroll down to the Speed dial section and configure 97771000 for
speedial1. Scroll down to the bottom of the screen and click on “Save changes”
To Next Page
Loading...
General