Cisco Unified Access CT5760 Guide

120 pages

To Next Page

To Previous Page

Switch Stack Update

Performing the Stack Update

Best Practice User Guide for the Catalyst 3850 and Catalyst 3650 Switch Series

Device# request platform software package clean switch all file flash:

Running command on switch 1

Cleaning up unnecessary package files

Scanning boot directory for packages ... done.

Preparing packages list to delete ...

done.

Running command on switch 2

Cleaning up unnecessary package files

Scanning boot directory for packages ... done.

Preparing packages list to delete ...

done.

The following files will be deleted:

[1]:

/flash/cat3k_caa-rpbase.BLD_V161_0_THROTTLE_LATEST_20151116_230450.SSA.pkg

/flash/cat3k_caa-srdriver.BLD_V161_0_THROTTLE_LATEST_20151116_230450.SSA.pkg

/flash/cat3k_caa-universalk9.BLD_V161_0_THROTTLE_LATEST_20151116_230450.SSA.bin

/flash/cat3k_caa-wcm.BLD_V161_0_THROTTLE_LATEST_20151116_230450.SSA.pkg

/flash/cat3k_caa-webui.BLD_V161_0_THROTTLE_LATEST_20151116_230450.SSA.pkg

/flash/packages.conf

/flash/packages.conf.00-

/flash/packages.conf.01-

/flash/packages.conf.02-

[2]:

/flash/cat3k_caa-rpbase.BLD_V161_0_THROTTLE_LATEST_20151116_230450.SSA.pkg

/flash/cat3k_caa-srdriver.BLD_V161_0_THROTTLE_LATEST_20151116_230450.SSA.pkg

/flash/cat3k_caa-universalk9.BLD_V161_0_THROTTLE_LATEST_20151116_230450.SSA.bin

/flash/cat3k_caa-wcm.BLD_V161_0_THROTTLE_LATEST_20151116_230450.SSA.pkg

/flash/cat3k_caa-webui.BLD_V161_0_THROTTLE_LATEST_20151116_230450.SSA.pkg

/flash/packages.conf

/flash/packages.conf.00-

/flash/packages.conf.01-

/flash/packages.conf.02-

Do you want to proceed? [y/n]y

[1]:

Deleting file flash:cat3k_caa-rpbase.BLD_V161_0_THROTTLE_LATEST_20151116_230450.SSA.pkg

...

done.

Deleting file

flash:cat3k_caa-srdriver.BLD_V161_0_THROTTLE_LATEST_20151116_230450.SSA.pkg

... done.

Deleting file

flash:cat3k_caa-universalk9.BLD_V161_0_THROTTLE_LATEST_20151116_230450.SSA.bin

... done.

Deleting file flash:cat3k_caa-wcm.BLD_V161_0_THROTTLE_LATEST_20151116_230450.SSA.pkg ...

done.

Deleting file flash:cat3k_caa-webui.BLD_V161_0_THROTTLE_LATEST_20151116_230450.SSA.pkg

...

done.

Other manuals for Cisco Unified Access CT5760

Hardware Installation Guide146 pages

Command Reference Guide40 pages

Getting Started Guide22 pages

Deployment Guide54 pages

Configuration Guide16 pages

Questions and Answers:

C
Christina KimAug 6, 2025
What to do if Express Setup does not run on Cisco Unified Access CT5760?
- A
  andersonrileyAug 6, 2025
  If Express Setup on your Cisco Switch isn't running or the setup page isn't loading in your browser, first ensure only the SYST and ACTV LEDs are green before pressing the Mode button to enter Express Setup. If the switch fails POST, contact your Cisco technical support. Also, power cycle the switch and confirm the SYST and ACTV LEDs are green before attempting to enter Express Setup mode. Verify that all LEDs next to the Mode button are green; if not, press and hold the Mode button. Change your PC or laptop settings to temporarily use DHCP before connecting to the switch. Disconnect the console port cable and connect via an Ethernet port, waiting 30 seconds before entering 10.0.0.1 in your browser. If it still doesn't work, wait 30 seconds and re-enter 10.0.0.1, pressing Enter.

Cisco Unified Access CT5760 Specifications

General

Manageable	Yes
Stacking	Yes
Operating Temperature	32 to 104°F (0 to 40°C)
Frequency Band	2.4 GHz, 5 GHz
Form Factor	Rack-mountable
Model	CT5760
Forwarding Rate	132 Mpps
Height	1.72"
Width	17.5"
Relative Humidity	10% to 90% non-condensing
Wireless LAN Standard	802.11a/b/g/n