Cisco WAP131 - Quick Start Configuration

Getting Started
Quick Start Configuration
Cisco WAP131 and WAP351 Administration Guide 17
1
Quick Start Configuration
To simplify the device configuration through quick navigation, the Getting Started
page provides links for performing common tasks. The Getting Started page is the
default window every time that you log into the configuration utility.
There are three hot links on the Getting Started page that take you to specific web
pages for more information. You can:
• Click the Support link to direct you to the product support page.
• Click the Forums link to direct you to the Cisco Support Community page.
• Click the Wireless Planning Tool link to direct you to the AirMagnet Planner
page.
Category Link Name (on the Page) Linked Page
Initial Setup Run Setup Wizard Using the Access Point
Setup Wizard
Configure Radio Settings Radio
Configure Wireless Network
Settings
Networks
Configure LAN Settings LAN
Configure Port Settings Port Settings
Configure Single Point Setup
(for WAP351 only)
Single Point Setup
Quick Access Change Account Password User Accounts
Upgrade Device Firmware Manage Firmware
Backup/Restore
Configuration
Manage Configuration
File
Device Status System Summary System Summary
Wireless Status Network Interfaces