Single Point Setup
Single Point Setup Overview
Cisco WAP131 and WAP351 Administration Guide 173
11
Operation of a Device Dropped From a Single Point Setup
When a WAP device that was previously a member of a cluster becomes
disconnected from the cluster, the following guidelines apply:
• The loss of contact with the cluster prevents the WAP device from receiving
the latest operational configuration settings. The disconnection results in a
halt to proper seamless wireless service across the production network.
• The WAP device continues to function with the wireless parameters that it
last received from the cluster.
• The wireless clients associated with the non-clustered WAP device
continue to associate with the device with no interruption of the wireless
connection. In other words, the loss of contact with the cluster does not
necessarily prevent the wireless clients associated with that WAP device
from continued access to network resources.
• If the loss of contact with the cluster is due to a physical or logical
disconnection with the LAN infrastructure, the network services out to the
wireless clients may be impacted depending on the nature of the failure.
Configuration Parameters Propagated and Not Propagated to
Single Point Setup Access Points
The following tables summarize the configurations that are shared and
propagated among all clustered WAP devices:
Common Configuration Settings and Parameters that are Propagated in
Single Point Setup
Captive Portal Password Complexity
Client QoS User Accounts
Email Alert QoS
HTTP/HTTPS Service (Except
SSL Certificate Configuration)
Radio Settings Including TSPEC Settings
(Some exceptions)
Log Settings Rogue AP Detection
MAC Filtering Scheduler
Management Access Control SNMP General and SNMPv3
To Next Page
Loading...
