Cisco WAP131 - Chapter 5: Wireless; Radio

5
Cisco WAP131 and WAP351 Administration Guide 74
Wireless
This chapter describes how to configure the wireless radio properties. It includes
these topics:
• Radio
• Rogue AP Detection
• Networks
• Scheduler
• Scheduler Association
• Bandwidth Utilization
• MAC Filtering
• WDS Bridge
• WorkGroup Bridge
• Quality of Service
Radio
Radio settings directly control the behavior of the radio in the WAP device and its
interaction with the physical medium; that is, how and what type of signal the WAP
device emits.
To configure the wireless radio settings:
STEP 1 Select Wireless > Radio.
STEP 2 In the TSPEC Violation Interval field, enter the time interval in seconds for the
WAP device to report associated clients that do not adhere to mandatory
admission control procedures. The reporting occurs through the system log and
SNMP traps. Enter a time from 0 to 900 seconds. The default is 300 seconds.