Administration
Support Information
Cisco WAP131 and WAP351 Administration Guide 63
3
STEP 5 Click Download.
To download a packet capture file using HTTP/HTTPS:
STEP 1 Select Administration > Packet Capture.
STEP 2 Uncheck Use TFTP to download the captured file.
STEP 3 Click Download. A confirmation window appears.
STEP 4 Click OK. A dialog box displays that enables you to choose a network location to
save the file.
Support Information
Use the Support Information page to download a text file that contains detailed
configuration information about the WAP device. This file includes the software
and hardware version information, MAC and IP addresses, the administrative and
operational status of features, user-configured settings, traffic statistics, and more.
You can provide the text file to the technical support personnel to assist them in
troubleshooting problems.
To download the support information:
STEP 1 Select Administration > Support Information.
STEP 2 Click Download to generate the file based on the current system settings. After a
short pause, a window appears to enable you to save the file to your computer.
Spanning Tree Settings
Use the Spanning Tree Settings page to configure the STP settings on the Cisco
WAP351. It supports the configuration per port or on the whole device.
NOTE You can go to the WDS Bridge page to configure the STP settings for the Cisco
WAP131.
To Next Page
Loading...
