Cisco WAP131 - Manually Configuring the Time Settings

Administration
Time Settings
Cisco WAP131 and WAP351 Administration Guide 39
3
A host name can consist of one or more labels, which are sets of up to 63
alphanumeric characters. If a host name includes multiple labels, each is
separated by a period (.). The entire series of labels and periods can be up
to 253 characters long.
• Time Zone—Select the time zone for your location.
• Adjust Time for Daylight Savings—If daylight savings time is applicable to
your time zone, check this option and configure the following fields:
- Daylight Savings Start—Select the week, day, month, and time when
daylight savings time starts.
- Daylight Savings End—Select the week, day, month, and time when
daylight savings time ends.
- Daylight Savings Offset—Specify the number of minutes to move the
clock forward when daylight savings time begins and backward when it
ends.
STEP 4 Click Save. The changes are saved to the Startup Configuration.
Manually Configuring the Time Settings
To manually configure the time settings:
STEP 1 Select Administration > Time Settings.
STEP 2 In the System Clock Source area, choose Manually.
STEP 3 Click Cloning next to the Clone PC Time field to clone the system time settings
from your local PC.
STEP 4 You can also configure the following fields:
• System Date—Select the current month, day, and year date from the drop-
down lists.
• System Time—Select the current hour and minutes in 24-hour clock format.
• Time Zone—Select the time zone for your location.
• Adjust Time for Daylight Savings—If daylight savings time is applicable to
your time zone, check this option and configure the following fields: