Wireless
Quality of Service
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point 100
5
551/561
STEP 1 For WAP561 devices, select the radio interface on which to configure QoS settings (Radio 1 or
Radio 2).
STEP 2 Select an option from the EDCA Template list:
• WFA Defaults—Populates the WAP device and Station EDCA parameters with WiFi
Alliance default values, which are best for general, mixed traffic.
• Optimized for Voice—Populates the WAP device and Station EDCA parameters with
values that are best for voice traffic.
• Custom—Enables you to choose custom EDCA parameters.
These four queues are defined for different types of data transmitted from WAP-to-station. If
you choose a Custom template, the parameters that define the queues are configurable;
otherwise, they are set to predefined values appropriate to your selection. The four queues are:
• Data 0 (Voice)—High priority queue, minimum delay. Time-sensitive data such as VoIP
and streaming media are automatically sent to this queue.
• Data 1 (Video)—High priority queue, minimum delay. Time-sensitive video data is
automatically sent to this queue.
To Next Page
Loading...
