Administration
UpgradeManage Firmware
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point 43
3
Swapping the Firmware Image
Swapping the Firmware Image
To swap the firmware image running on the AP:
STEP 1 Select Administration > Manage Firmware in the navigation pane.
STEP 2 Click Swap Active Image.
A dialog box appears confirming the firmware image switch and subsequent reboot.
STEP 3 Click OK to proceed.
The process may take several minutes, during which time the access point is unavailable. Do
not power down the access point while the image switch is in process. When the image switch
is complete, the access point restarts. The AP resumes normal operation with the same
configuration settings it had before the upgrade.
TFTP Upgrade
TFTP Upgrade
To upgrade the firmware on an access point using TFTP:
STEP 1 Select Administration > Manage Firmware in the navigation pane.
Manage Firmware
To Next Page
Loading...
