Client Quality of Service
ACL
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point 116
7
STEP 1 Select Client QoS > ACL in the navigation pane.
ACL
STEP 2 Enter these parameters to create a new ACL:
• ACL Name—A name to identify the ACL. The ACL name can include from 1 to 31
alphanumeric characters and the following special characters: hyphen, underscore,
backslash, and colon. Spaces are not allowed.
• ACL Type—The type of ACL to configure:
- IPv4
- IPv6
- MAC
IPv4 and IPv6 ACLs control access to network resources based on Layer 3 and Layer 4
criteria. MAC ACLs control access based on Layer 2 criteria.
STEP 3 Click Add ACL.
To Next Page
Loading...
