Getting Started
Using the Access Point Setup Wizard
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point 15
1
Access Point Setup Wizard—VLAN ID
STEP 14 Enter a VLAN ID for traffic received on the wireless network.
It is suggested that you assign a different VLAN ID from the default (1) to wireless traffic, in
order to segregate it from management traffic on VLAN 1.
STEP 15 Click Next.
STEP 16 For the WAP561 device, the Network Name, Wireless Security, and VLAN ID pages show to
enable configuring Radio 2. When finished with configuring Radio 2, click Next.
To Next Page
Loading...
