Administration
Copy/Save Configuration
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point 51
3
STEP 1 Select Administration > Copy/Save Configuration in the navigation pane.
Copy/Save Configuration
3x
5x
STEP 2 Select the Source File Name:
• Startup Configuration—Configuration file type used when the WAP device last booted.
This does not include any configuration changes applied but not yet saved to the WAP
device.
• Backup Configuration—Backup configuration file type saved on the WAP device.
• Mirror Configuration—If the Startup Configuration is not modified for at least 24 hours,
it is automatically saved to a Mirror Configuration file. The Mirror Configuration file is
a snapshot of a past Startup Configuration. The Mirror Configuration is preserved
across factory resets, so it can be used to recover a system configuration after a factory
reset by copying the Mirror Configuration to the Startup Configuration.
STEP 3 For the Destination File Name, select the file type to be replaced with the file you are copying.
STEP 4 Click Save to begin the copy process.
When complete, a window shows the message, Copy Operation Successful.
To Next Page
Loading...
