51
• In the case the watch switches to the insufficient charging warning function
as a result of being insufficiently charged, it takes a minimum of 30 minutes
for the watch to return to the normal operating state even if sufficiently
exposed to light.
<When the Insufficient Charging Warning Function is Canceled>
When the insufficient charging warning function is canceled as a result of
exposing the watch to light and sufficiently charging, the watch returns to the
mode indicated by the mode hand.
50
[Time Setting Warning Function]
(Provided for CAL. No. C650)
The watch will stop running if it remains insufficiently charged for about 1.5 days.
When the watch is sufficiently charged by exposing to light after the watch has
stopped as a result of being insufficiently charged, the display changes in the
manner described below.
(Analog Display)
• Each hand rapidly advances to the reference position and stops. Each hand
remains stopped until the time is reset.
(Digital Display)
• The display of “12:00:00, UTC or January 1 SU, UTC” flashes in the time or
calendar mode.
To Next Page
Loading...
