Citizen CT-S4000 - Daily Maintenance; Daily Cleaning Procedures

CT-S4000 Service Manual
9
1.2.3 Disassembling COVER
1. Removing COVER
・Remove COVER from CASE.
2. Removing CABLE, HOLDER and HOLDER, PLATEN
・Remove four M3x10(BT) screws and detach CABLE,
HOLDER1, 2 and HOLDER, PLATEN.
1.2.4 Disassembling SA PLATEN
1. Remove M2x4 (BT) screw and detach BLADE, FIXED.
2. Remove two M3x6 (BT) screws of COVER, SENSOR.
Move these portions inward.
Remove COVER from CASE.
M3x10 (BT)
M2x4 (BT)
M3x6 (BT)