Precautions in diving
WARNING – Before diving –
• Check to see if the watch is set to the time mode. (When the watch is set to the
chronograph mode, it will not shift to the dive mode.)
• Check the indication of the function hand (on the charging level index). When the
function hand points to “NG”, the watch will not shift to the dive mode because of
insufficient charge. If the function hand points to “NG”, charge the watch sufficiently
so that the hand indicates “LV.2 (level 2)” or “LV.1 (level 1)”.
• Check to see if the function hand (serving as the depth indicator) points to “0 m (0
ft)” position when the water sensor is activated and the watch enters the dive mode.
• Check to see if the crown is completely pressed in and screwed down tightly.
• Check to see if the watchband and the watch are tightly fastened to each other.
• Check to see that there are no cracked, damaged or broken parts on the
watchband and glass.
• Check to see if the rotating bezel rotates normally.
• Check to see if the time and date are set correctly.
8
To Next Page
Loading...
