Citizen Eco-Drive b740 - 7. DIVE MODE; Dive Mode Activation and Memory

34
<Dive mode (Standby status)>
(B)
(A)
* If the function hand and
mode hand don’t point to
their respectively specified
positions (mode hand: “DV”
position, function hand: “0”
position) when the watch
enters the dive mode
(standby status), adjust the
hand positions referring to
“9. TROUBLESHOOTING”.
Mode hand:
“DV” position
7. DIVE MODE
When the watch is immersed in the water, while it is set in the time mode and
charged enough for diving, the water sensor senses the water and
automatically switches the watch to dive mode to measure the depth. In the
dive mode, the watch automatically memorizes the maximum depth of the last
dive (1 data) and the user can recall it after the dive.
Function hand:
“0” position