33
When the
crown is
unscrewed
(loosened).
When the
crown is
screwed
down
(fastened).
<Note on operation of the crown>
The crown of this watch is designed to be screwed down to secure the water-
resistance of the watch.
• For pulling out the crown for adjustment, unscrew it to get it loose first.
• After adjustment with the crown, press it in to the normal position and then
screw it down without fail.
• Do not operate any button while the crown is being pulled out.
If a button is operated in such the status, it may cause some change in the
indication or disorder of some hand(s).
• Do not pull out or turn the crown when the watch gets wet or is in the water.
Otherwise, the watch loses water-resistance and the inside of the watch gets
wet.
To Next Page
Loading...
