13. OTHER FUNCTIONS
[Rotating bezel]
The rotating bezel means the rotating ring set on the rim of the watch case. An
elapsed time can be checked by this rotating bezel.
• How to use the rotating bezel
On starting a dive, turn the rotating bezel
counterclockwise to set the triangle mark (
▽
) to
the position where the minute hand is located.
After that, the minute hand serves to indicate the
elapsed time on the rotating bezel.
(Example) In the figure on the right, the minute
hand indicates that 10 minutes has passed since
the dive was started (since the
▽
mark was set at
the starting point).
51
Elapsed time:
10 minutes
To Next Page
Loading...
