Time reset warning function
(Mode hand: “0” position, Function hand: “0” position)
With progress in charging as the watch is exposed to
light, it starts running but shows incorrect time. In this
condition the second hand moves irregularly every
two seconds to show that the time is incorrect. (Time
reset warning indication)
23
Overcharge prevention function
This watch has an overcharge prevention function. When the rechargeable cell
is fully charged, this function is activated to protect the watch from overcharge
by cutting of power supply. This function relieves you from worry about
overcharge.
2 seconds
2 seconds
Charge the watch sufficiently and reset the time to return to the normal
indication.
* In the case the watch is sufficiently charged but the watch has not been
reset to the correct time, the second hand continues to go irregularly every
two seconds.
To Next Page
Loading...
