37
<How to recall the memorized maximum depth>
(1) Press button (B) in the time mode or dive mode
(when depth indication is 0 m/0 ft). The function
hand indicates the memorized maximum depth.
(2) To cancel the maximum depth indication, press
button (B) again.
* Indication of the memorized maximum depth
continues for 30 seconds and is automatically
canceled after that.
* The memory of the maximum depth of the last dive
is held until the watch is used in the next dive.
* If the maximum depth in diving is less than 1 m (5 ft), it is not memorized. On
the other hand, if the maximum depth exceeds 50 m (125 ft), it is memorized
as an overzone depth.
* When the watch is used in diving for the first time, it occasionally shows data
stored during inspection prior to shipment.
(B)
To Next Page
Loading...
