Citrix ADC MPX 5550 - Page 118

Citrix ADC MPX
1 root@ns# atacontrol status ar0
2 <!--NeedCopy-->
Output:
1 ar0: ATA RAID1 status: REBUILDING 10% completed
2 subdisks:
3 0 ad4 SPARE
4 1 ad6 ONLINE
5 <!--NeedCopy-->
Note: Rebuilding the RAID array takes some time.
8. Verify that the REBUILD is successful.
1 root@ns# atacontrol status ar0
2 <!--NeedCopy-->
Output:
1 ar0: ATA RAID1 status: READY
2 subdisks:
3 0 ad4 ONLINE
4 1 ad6 ONLINE
5 <!--NeedCopy-->
Note: Aer the rebuild operation completes, the subdisks status shows ONLINE, and the RAID
status shows READY.
9. Exit the shell and verify the status of the RAID array from the Citrix ADC CLI.
1 root@ns# exit
2 >sh raid
3 <!--NeedCopy-->
Output:
© 1999‒2022 Citrix Systems, Inc. All rights reserved. 118