Citrix ADC MPX 5550 User Manual

Citrix ADC MPX
1 RAID1 status: READY
2 Drive:
3 1 ONLINE
4 2 ONLINE
5 Done
6 <!--NeedCopy-->
Replace a solid-state drive
Replacement SSDs contain a pre-installed version of the Citrix ADC soware and a generic configu-
ration file (ns.conf). However, it does not contain SSL-related certificates and keys, or custom boot
settings. Configuration files and customized settings must be restored to a replacement drive from a
backup storage location at the customer site, if available. The files to be restored might include:
• /flash/nsconfig/ns.conf: The current configuration file.
• /flash/nsconfig/ZebOS.conf: The ZebOS configuration file.
• /flash/nsconfig/license: The licenses for the Citrix ADC features.
• /flash/nsconfig/ssl: The SSL certificates and keys required for encrypting data to clients or to
back-end servers.
• /nsconfig/rc.netscaler: Customer-specific boot operations (optional).
To replace a solid-state drive:
1. At the Citrix ADC command prompt, exit to the shell prompt. Type:
shell
2. Shut down the Citrix ADC appliance by typing the following command at the shell prompt:
shutdown ‒p now
3. Locate the SSD on the back panel of the appliance. Push the safety latch of the drive cover to the
right or down, depending on the platform, while pulling out on the drive handle to disengage.
Pull out the faulty drive.
Note: The illustration in the following figures might not represent the actual Citrix ADC appli-
ance.
Figure 4. Remove the existing solid-state drive
© 1999‒2022 Citrix Systems, Inc. All rights reserved. 119

Citrix ADC MPX 5550 Specifications

General

Brand	Citrix
Model	ADC MPX 5550
Category	Network Hardware
Language	English