Citrix ADC MPX
Tip: For first-time setup in a network, to facilitate troubleshooting, make sure that a laptop/PC is
connected directly to the LOM port. Do the following if you can ping and access the LOM GUI at the
default IP address (192.168.1.3) by using static addressing on the laptop/PC, but remote access does
not work.
• Take a closer look at network firewall settings and access control list(ACL) policies of all network
devices along the network path.
Tip: If some LOM GUI features work but others do not (for example, normal ADC console output is
visible in the ADC console window in the LOM GUI, but typing in the console does not work), try the
preceding method to isolate the cause to the specific BMC protocol being blocked by the network.
Tip: Use the iKVM (HTML5) feature to access the LOM GUI. Alternately, use Java. Ensure that the latest
Java updates are installed on your computer.
Configure the Citrix ADC LOM port by using the GUI
1. In a web browser, type http://192.168.1.3 and enter the default user credentials.
Note: The Citrix ADC LOM port is preconfigured with IP address 192.168.1.3 and subnet mask
255.255.255.0.
2. On the Configuration tab, click Network and type new values for the following parameters:
• IP Address—IP address of the LOM port
• Subnet Mask—Subnet mask used to define the subnet of the LOM port
• Default Gateway—IP address of the router that connects the LOM port to the network
3. Click Save.
4. If you want to change the user credentials, navigate to Configuration > Users, select the user,
click Modify User, and change the credentials.
Configure the Citrix ADC LOM port by using the shell
Note: You need superuser (admin) credentials to access the shell.
1. Configure the IP addressing mode:
• To use DHCP, at the shell prompt, type:
ipmitool lan set 1 ipsrc dhcp
No further IP-level configuration is required.
• To use static addressing, at the shell prompt type:
a) ipmitool lan set 1 ipsrc static
b) ipmitool lan set 1 ipaddr <LOM IP address>
c) ipmitool lan set 1 netmask <netmask IP address>
d) ipmitool lan set 1 defgw ipaddr <default gateway IP address>
© 1999‒2022 Citrix Systems, Inc. All rights reserved. 162
To Next Page
Loading...
Need help?
General
