124
INJECTION
FEATURES OF SIEMENS HDI DIRECT INJECTION SYSTEM
(diagr.) Component Supplier Reference Observations
1
2
3
4
5
6
7
8
9
10
11
12
13
14
17
Diesel injection ECU
Engine speed sensor
Camshaft position sensor
Engine coolant temperature sensor
Vehicle speed sensor
Atmospheric pressure sensor
Battery
Injection double relay
Diagnostic warning lamp
Central diagnostic socket
Electronic immobiliser
Consumption information
Rev counter
Preheating warning lamp
Accelerator pedal sensor
SIEMENS
ELECTRIFIL
ELTH
SIEMENS
SIEMENS
SID 802
112-way grey connector : sequential injection
3-way black connector - Location : Close to crankshaft pulley.
Tighten to 0.7
±
0.2 m.daN
3-way grey connector – On cylinder head.
Tighten to 0.4 ± 0.1 m.daN
3-way green connector – on coolant housing.
Tighten to
1.7 ± 0.1 m.daN
Incorporated in the engine ECU.
12 Volts
Incorporated in the BSM.
Incorporated in the instrument panel.
In the passenger compartment.
Incorporated in the BSI transponder, and engine ECU.
Incorporated in the instrument panel.
Electrical circuit