335
CLUTCH
GEARBOX
TRANSMISSION
Engines: KFV - NFU - RFN - RHZ
Updating the value of the oil usage counter.
Using PROXIA.
Access to reading and recording of the oil counter is via the menu:
- «Configuration (integrated circuit button) / Oil counter».
Adjustment of the oil counter value is done in incremental steps of
2750 units.
Using LEXIA or ELIT.
Access to reading and recording of the oil counter is via the menu:
- «Oil counter».
Adjustment of the oil counter value is done by entering directly the
5 figures of the oil counter.
Downloading.
ECU downloading procedure:
- Follow the diagnostic tool procedure.
A new ECU or downloaded update is always configured with the
following options:
- SHIFT LOCK gear selection lever position.
- Without OBD outlet
(depollution L4).
If the ECU is to be fitted to a vehicle with depollution
L4 or not
equipped with gear lever locking safety:
- Perform a configuration operation.
Pedal initialisation.
A pedal initialisation must be carried out in the following cases:
- Replacement of the automatic gearbox ECU.
- Replacement of the automatic gearbox.
- Downloading of the ECU configuration.
- Adjustment or replacement of the accelerator cable.
- Replacement of the butterfly potentiometer.
RECOMMENDATIONS - PRECAUTIONS: AL4 AUTOMATIC GEARBOX
C3 - XSARA - XSARA PICASSO
Procedure for initialising the automatic gearbox ECU
To Next Page
Loading...
