CITROEN C2 2004 - Page 343

339
CLUTCH
GEARBOX
TRANSMISSION
AL4 AUTOMATIC GEARBOX
Tightening torques (m.daN).
A: EW7
and EW10 engines
Hydraulic block fixing.
Centre the hydraulic block, using screws (11) and (12) .
Pre-tighten (no strict order) : 0,9
Slacken : All 7 screws
Tighten (respect the order indicated) : 0,75
NOTE:
The screw (11) is shouldered.
B: DW10 engine.
Hydraulic block fixing.
Centre the hydraulic block, using screws (11) and (12).
Pre-tighten (no strict order) : 0,9
Slacken : All 7 screws
Tighten (respect the order indicated) : 0,75
NOTE:
The screw (11) is shouldered.
(13) Fixing of selector lever position switch : 1,5 ± 0,2
(14) Oil filler plug : 2,4 ± 0,4
Engines: KFV - NFU - RFN - RHZ
C3 - XSARA - XSARA PICASSO
B2CP3EFD
B2CP3EGC