391
AXLES
SUSPENSION
STEERING
XSARA
REAR AXLE
- The front silentblocks are aligned at an angle of 45° in relation to the vehicle’s axis.
- The
rear silentblocks are in parallel with the vehicle’s axis.
NOTE: There are two suppliers for the silentblocks:
-
RBT, identified by a Green or Yellow painted dot on the side of the mounting.
-
PAULSTRA, identified by a Black painted dot on the side of the mounting.
It is
FORBIDDEN to swap components of different suppliers.
Operating clearance - X = 1 to 1.4 mm.
NOTE: The RH torsion bar can be identified by 1
paint line.
The LH torsion bar can be identified by
2 paint lines.
B3DP04UD
B3DP04TC
To Next Page
Loading...
