433
BRAKES
BRAKE SPECIFICATIONS
Evolution: rear wheel cylinder (applies from RPO 9667)
C3 - C3 Pluriel
Evolution.
New wheel cylinders at the rear, with cut-off pressure 27 bars instead of 35 bars.
Assembly.
(1) Rear wheel cylinder.
Repair.
IMPERATIVE: The mixing of the old and new components is STRICTLY FORBIDDEN.
WARNING: Identify the type of assembly prior to starting a repair.
ESSENTIAL: Systematically replace the wheel cylinders on both sides on the same axle.
Replacement parts.
Replacement Parts will market only the components for the new assembly.
C3 - C3 PLURIEL
To Next Page
Loading...
