CITROEN C4 PICASSO - Page 160

158
Driving
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Exceeding the programmed
speed
Ifthecruisespeedsettingisexceeded,the
displayedspeedflashes.
Thedisplaybecomessteadyagainoncethe
vehiclereturnstothecruisespeedsetting.
Switching off
F Turn thumbwheel 1 to the "0"position.
The display of information related to the
cruisecontroldisappears.
Switching on
Once the cruise control is switched on, you
canmodifythecruisingspeedinoneofthe
followingways:
- usingbuttons2 or 3:
F by successive short presses, to modify
thespeedby+or-1mph(km/h),
Fbyalongpress,tomodifythespeedin
stepsof+or-5mph(km/h),
- bypressingbutton5:
Fthesixmemorisedspeedsaredisplayed
in the touch screen tablet,
Fchooseavalue:itisdisplayedinthe
instrumentpanel.
The selection screen closes after a few
moments.
Themodificationisthenaccepted.
F Turn thumbwheel 1 to the "CRUISE"
position:thecruisecontrolmodeis
selectedbutispaused.
F Press button 2 or 3:yourvehicle'scurrent
speedbecomesthecruisespeed.
Thecruisecontrolisactivated(ON).
Modication of the cruise speed
(speed setting)
- bypressingbutton5, if your vehicle has
speedlimitrecognition:
F the speed to memorise is displayed in
the instrument panel,
F press button 5 againtosavethespeed.
The value is then displayed in the instrument
panel.
For more information on Speed limit
recognition and memorisation, refer to the
correspondingsection.
Pause
You can pause the cruise control at any time
bypressingbutton4:thescreenconfirmsthe
pause.